Cracks at the back of esraj

This is for discussions about sarangi, dilruba, esraj, or any bowed instrument used in India

Moderators: povster, cabernethy, coughcapkittykat, s1owpoke

Cracks at the back of esraj

Postby Indianmusiclover » Sun Mar 21, 2010 1:28 am

I bought an esraj from U.K and have it shipped to the U.S. During transit, there was a crack in the back of fret board and one on the back of the "gourd" part of the instrument. Any a luther be able to repair such cracks or any suggestions on experience Indian instrument repair? I am located in Arizona. Thanks.
Indianmusiclover
 
Posts: 4
Joined: Sat Feb 20, 2010 8:01 am

Re: Cracks at the back of esraj

Postby satwas » Mon Aug 30, 2010 5:09 pm

hi
i had a cack 2 but it was caused bey acidently doping .and my one is 40 ? years old . i have seen in dehli in an musick shop an cacket one also .tey wantet to sell my this bey sayin no problem :roll: :oops: .u can get it fixt but u will have to take it apart totaly .so u have kind of rebuild it .i have done it with ok result . so give it an try and if u fail u get an other one and u know how it looks inside . :)
satwas
 
Posts: 13
Joined: Mon Aug 30, 2010 2:50 pm


Return to VITAT (Sarangi, Dilruba, Violin, Etc)

Who is online

Users browsing this forum: No registered users and 1 guest

Go To Forum Archives